
Penguin Chillers
Penguin Chillers Cold Therapy Chiller
No Thanks / No (Chiller Only)
$1,949.99
La cobertura varía según la marca y el modelo. Podemos ayudarle a confirmar los detalles antes de ordenar.
Consultar sobre la cobertura de garantíaCold on demand. No more ice runs.
Turn your cold plunge into a ready-when-you-are recovery ritual. The Penguin Chillers Cold Therapy Chiller pairs 7,500 BTU/hr of cooling with a built-in pump and quick-connect fittings. It chills water down to 37°F and easily holds the low-to-mid 40s most cold plungers aim for, day after day, without bags of ice.
Why you'll love it
- Truly cold: chills to 37°F and comfortably maintains low-to-mid 40s°F plunge temperatures
- All-in-one design: built-in pump, inline debris screen and 3/4″ camlock quick connects for a simpler install
- Outdoor-rated and rainproof for year-round use in ambient temperatures above 32°F
- Quiet and efficient: 56 dBA on standard 110–120V household power, with an estimated operating cost as low as $18/month (at $0.12/kWh, per Penguin Chillers)
- Made in the USA: Built by Penguin Chillers in Knoxville, Tennessee, an official member of the Made in Tennessee program.
Choose your setup
- Chiller only: for tubs you've already plumbed
- Chiller + Install & Filter Kit: adds a washable, reusable 150-micron filter, 2 × 6′ lengths of 3/4″ ID black vinyl tubing, 2 bulkheads with hose clamps, and 2 barbed elbow fittings. Kit bulkheads fit tub walls 1/4″ thick or less.
Will it fit my tub?
Penguin chillers can be added to many home cold plunge tubs when the setup below is in place. Check each point before you order:
- ☐ Placement: the chiller can sit within 3′ of your tub's drain, with its base level with or lower than the bottom of the tub (the built-in pump is gravity-fed and not self-priming)
- ☐ Connections: your tub has, or can take, an outlet and a return. Install & Filter Kit bulkheads fit tub walls 1/4″ thick or less; thicker walls need different fittings
- ☐ Power: a standard 110–120V household outlet within reach of the 6 ft cord
- ☐ Location: indoors or outdoors where the air stays above 32°F (drain the chiller if it may freeze)
- ☐ Water care: no ozone venturi and no filter rated finer than 50 microns
- ☐ Use: a home cold plunge, not a commercial facility
- ☐ No built-in chiller: tubs or spas with their own cooling system, or plans to build the chiller into a tub, need Penguin Chillers' setup approval first
Ambient temperature, insulation and sun exposure all affect cooling, so larger, uncovered or poorly insulated tubs may need a more powerful chiller. Not sure? Send us your tub's size, material and current plumbing and the FitHaven team will help you check fit before you buy.
Specifications
- Cooling capacity: 7,500 BTU/hr
- Operating range: 37°F–100°F with water
- Power: 110–120V, 3.9A, 450W, single phase, 6 ft cord
- Connections: 3/4″ camlocks
- Refrigerant: R-32
- Sound rating: 56 dBA
- Dimensions: 17″ W × 15″ L × 13″ H
- Weight: 49 lbs
- Outdoor rated: Yes, for ambient temperatures above 32°F
In the box
- Cold Therapy Chiller with built-in pump
- Quick-connect fittings for tubing installation
- Inline screen for filtering debris
- Tubing is sold separately unless you choose the Install & Filter Kit
Setup essentials
- Place the chiller within 3′ of your tub's drain, with its base level with or lower than the bottom of the tub
- The pump is not self-priming, so your setup must gravity-feed water to it
- Run the pump continuously (timers aren't recommended) and keep the filter clean
- Don't use a filter rated below 50 microns or an ozone venturi
- Drain the chiller completely if temperatures drop to freezing
- Designed for home use. For commercial setups, see the Outdoor 1/2 HP High Efficiency Water Chiller
Complete your setup: keep water fresh with the Penguin Chillers Cold Therapy Chlorinating Kit and Cold Therapy Filter Replacements.
Shipping, warranty & support
- Free shipping to the contiguous U.S. (48 states and DC). Typically ships from Penguin Chillers in Tennessee within 2–5 business days (occasionally up to 7), plus 2–7 business days in transit. Times are estimates, not guarantees.
- 1-year manufacturer's warranty included. Add 2- or 3-year extended coverage using the warranty option above.
- Questions about sizing or setup? Contact the FitHaven team before you order and we'll help you choose the right chiller.
